An example of a customized solution of bank notes destruction system
Feeding
The bank notes can be fed manually or by tipping device on the conveyor belt which forwards it dosed to the shredder. To transport the shreds for a longer distance it is necessary to use an air transportation system such as a chopper fan. It generates the necessary air flow to transport the waste through a system of pipes to the briquetting press.
Shredding
Complete sheet packs or whole bundles of bank notes are getting pre-chopped into smaller pieces by efficient shredders.
Granulating
The granulator reduces the material to small particles to fulfil the requirements of security level.
Separating
The shred particles of banknotes are getting separated from the transportation air and fed into the briquetting press.
Filtering
The jet-filter furifies the air of dust. By means of a screw conveyor the dust is fed to a briquetting press, which compacts it into briquettes.
Briquetting
The chamber briquetting press compacts the security conform reduced particles to briquettes with a enormous high density. The output of the briquettes happens automatically.
Control unit / Remote diagnosis
The heart of each system solution. The art of mastering measurement and control means using a minimum amount of energy, maintaining high availability, and being adaptable to change.
A user friendly visualisation panel shows each procedure step to users. By means of remote diagnosis, the availability of the equipment is increased and maintenance costs decreased. Status messages are received online by designated recipients, in particular at the Hunkeler Operations Centre, where necessary actions can promptly be taken.
BANKNOTES-PUNCHER HBP 100
Description:
The systems of destruction HCDS are providing centralised solutions for the cancellation of Banknotes. For reply to the demand of decentralized solutions in the agencies, the HBP 100 Easy suits perfectly for the cancelling of Banknotes. The HBP 100 Easy decreases considerably the risks of transport and eases the logistic of transfer till the Central bank.
Operation:
After the switch on of hydraulic pump by means of pushbutton, the bundle of banknote can be put in the drawer.
After have pushed the drawer till the end position and an automatic locking of drawer, the punching process will be started automatically.
After an automatic unlocking, the drawer can be opened and during this operation, the bundle will be ejected automatically by conveyor till the box.
Picture of HBP 100